СЕРВИС ПО ВЫБОРУ ДАТЧИКОВ

Надёжны ли, долговечны ли индуктивные датчики? Какова стойкость индуктивных датчиков к механическим воздействиям? Reliability of inductive sensors.

08.09.2022

Редактор.

Из беседы с руководителем весьма именитого европейского производителя (на их производстве индуктивных датчиков) известно:
а).количество брака при производстве, в среднем, составляет 4 %. Степень автоматизации на том производстве невысокая. Все дефектные экземпляры отсеиваются выходным контролем и, соответственно, к потребителю отгружаются только датчики годные, прошедшие выходной контроль.

Из бесед с потребителями датчиков - с инженерно-техническим персоналом разнообразных производств известно:
б).чем ниже квалификация технического персонала на производстве, тем небрежнее работники относятся к многочисленным датчикам, тем сильнее персонал заблуждается, что ударив датчик, наступив на датчик, оперевшись на датчик, датчику хуже не будет.

Из бесед с разными именитыми производителями индуктивных датчиков известно:
в).производители датчиков отслеживают статистику отказов датчиков, работающих у потребителя. По мнению этих производителей датчиков наиболее часто встречающаяся причина отказов датчиков – механический удар или иное чрезмерное механическое воздействие на корпус индуктивного датчика.

г).Об очень разных гарантийных сроках на датчики смотрите, пож-та, пост от 20 августа 2022 года в
телеграм-канале “ДатчикиNews”  https://t.me/sensorsnews   

Источник  https://www.sesese.org/Home/Publication?id=89   указывает, что применение цельнометаллических корпусов из нержавеющей стали в индуктивных датчиках увеличивает до 20 раз срок службы датчиков по сравнению с датчиками в пластиковых корпусах. Увеличивается срок службы, в основном, по той причине, что содержимое цельнометаллического датчика становится устойчивее к ударам и истирающим воздействиям корпуса.

Видео-испытания прочности индуктивных датчиков компании Contrinex с цельнометаллическим корпусом:
1). испытание ударами молотка по резьбовым бокам датчика
https://plusautomation.co.uk/500-inductive_htm_files/Contrinex_Inductive_700_Series_Robust_survive_the_HAMMER_TEST!.mp4
2). забивание гвоздя с помощью торцевой поверхности датчика
https://plusautomation.co.uk/500-inductive_htm_files/Contrinex_Inductive_700_Series_Inductives_-_Hammer_Demo!.mp4

 

From a conversation with the head of a very eminent European manufacturer (in their plant of inductive sensors) it is known:
a) the number of defects in production, on average, is 4%. The degree of automation in that production is low. All defective specimens are screened out by the output control and, accordingly, only suitable sensors that have passed the output control are shipped to the consumer.

From conversations with consumers of sensors - with engineering and technical personnel of various industries, it is known:
b). The lower the qualification of technical personnel at the plant, the more carelessly the workers treat numerous sensors, the more the staff is deluded that hitting the sensor, stepping on the sensor, leaning on the sensor, the sensor will not get worse.

From conversations with various eminent manufacturers of inductive sensors, it is known:
c). sensor manufacturers track the failure statistics of sensors operating at the consumer. According to these sensor manufacturers, the most common cause of sensor failure is mechanical shock or other excessive mechanical stress on the body of the inductive sensor.

d). For very different warranty periods for sensors, please see the post dated August 20, 2022 in the telegram channel “SensorsNews”
https://t.me/sensorsnews   

The source https://www.sesese.org/Home/Publication?id=89  indicates that the use of all-metal stainless steel housings in inductive sensors increases the service life of sensors by up to 20 times compared to sensors in plastic housings. The service life is increased, mainly due to the fact that the contents of the all-metal sensor become more resistant to shock and abrasion of the housing.

Video strength testing of Contrinex company all-metal inductive sensors:
1). hammer test on the threaded sides of the sensor
https://plusautomation.co.uk/500-inductive_htm_files/Contrinex_Inductive_700_Series_Robust_survive_the_HAMMER_TEST!.mp4
2). driving a nail using the end face of the sensor
https://plusautomation.co.uk/500-inductive_htm_files/Contrinex_Inductive_700_Series_Inductives_-_Hammer_Demo!.mp4

Полезные ссылки:

Сайт разработан командой SESESE.org

Копирование материалов сайта возможно только с указанием ссылки на первоисточник.